LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege5 Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> On-Vehicle Tests >> Back-Up Current
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back-Up Current

  1. Verify that the ignition switch is off and that the ignition key has been removed.
  2. Disconnect the negative battery cable.
    3. CAUTION: Operating electrical loads while measuring the back-up current can damage the circuit tester.
  3. Measure the back-up current between the negative battery terminal and the negative battery cable.
  4. If the current exceeds the maximum (20 mA), remove the fuses in the main fuse block and the fuse block one by one while measuring the back-up current.
  5. Inspect and repair harnesses and connectors of the fuse at which the current reduces.
scientia non olet · About LEMON Manuals