Removal & Installation

Remove the wheel and tire. Refer to WHEELS AND TIRES .
Detach the grommet from the body and pull the connector through the hole.

Fig 1: Remove Grommet
Courtesy of MAZDA MOTORS CORP.
Disconnect the sensor wiring.

Fig 2: Disconnecting Sensor Wiring
Courtesy of MAZDA MOTORS CORP.
Detach the bolt.

Fig 3: Disconnecting Sensor Wiring Retainer Bolt
Courtesy of MAZDA MOTORS CORP.
Remove the bolts.

Fig 4: Removing Sensor Wiring Retainer Bolts
Courtesy of MAZDA MOTORS CORP.

NOTE: Clean off any dirt that may have collected around the sensor before removal.

Fig 5: Removing Sensor

Courtesy of MAZDA MOTORS CORP.

NOTE: Thoroughly clean the mounting surface.