LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Removal/Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC HU/CM Removal/Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. When removing/installing the DSC HU/CM from/to the vehicle, attach a strip of protective tape on the DSC HU/CM connector to prevent brake fluid from entering.
scientia non olet · About LEMON Manuals