LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls [System & Component Testing] >> Relays & Solenoids >> Main Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Relay

NOTE: On MAZDA6, when testing ET control relay, use main relay testing procedure.
  1. Ensure main relay clicks when ignition is turned on and off. If no sound is heard, locate and remove main relay from main fuse box, in engine compartment. Using ohmmeter, check continuity between main relay terminals "C" and "D". See Fig 1 and Fig 2 . Continuity should not be present.
  2. Using fused jumper wires, apply battery voltage to main relay terminal "A" and ground terminal "B" (terminal E" on MAZDA6 & MPV). Continuity should be present between main relay terminals "C" and "D". See Fig 1 and Fig 2 . If continuity is not as specified, replace main relay.
Fig 1: Identifying Main Relay Test Terminals (Except MAZDA6 & MPV)
G00110103Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Main Relay Test Terminals (MAZDA6 & MPV)
G00110104Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals