LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - General >> O/D Off Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

O/D Off Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  3. Remove the column cover.
  4. Remove the combination switch.
  5. Disconnect the connector.
  6. Remove the selector lever component.
  7. Install the selector lever component.

    Tightening torque 

    7.9-10.7 N.m {80-110 kgf.cm, 69.5-95.4 in.lbf} 

  8. Connect the connector.
  9. Install the combination switch.
  10. Install the column cover.
  11. Install the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  12. Connect the negative battery cable.
scientia non olet · About LEMON Manuals