LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> MPV LX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - General >> Input/Turbine Speed Sensor Inspection >> Inspection of Individual Part
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection of Individual Part

  1. Remove the input/turbine speed sensor. (See INPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION  .)
  2. Measure resistance between the terminals of the input/turbine speed sensor.
    • If not as specified, replace the input/turbine speed sensor.
    • If it is normal, replace the harness.

    Resistance (ATF temperature: 20 °C {68 °F}) 513-627 ohms 

    Fig 1: Measuring Input/Turbine Speed Sensor Resistance
    G01883413Courtesy of MAZDA MOTORS CORP.
  3. Install the input/turbine sensor. (See INPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION  .)
scientia non olet · About LEMON Manuals