Tire Pressure Monitoring System (TPMS) Configuration

TIRE PRESSURE MONITORING SYSTEM (TPMS) CONFIGURATION

NOTE: After the wheel unit replacement, registration of the wheel unit identification codes must be performed automatically according to the following procedure.

When Replacing Wheel Unit:
1. Turn the ignition switch to the "ON" position, then turn "OFF".
2. Leave the vehicle with the engine "OFF" for 15 min or more.
3. Drive the vehicle at a speed of 20 km/h (12 mph) or more for 10 min or more.
4. After driving for 10 min, verify that the TPMS warning light has neither flashed nor illuminated.