Crankshaft Position (CKP) Sensor Removal/Installation - 2.3L: Installation

Fig 1: Installing CKP - 2.3L

Courtesy of MAZDA MOTORS CORP.

1. Install a new CKP, but do not tighten the bolts at this time.
   Fig 2: Adjusting CKP With Crankshaft Position Sensor Alignment Jig And Tighten Bolts - 2.3L

   Courtesy of MAZDA MOTORS CORP.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
   Fig 3: Connecting CKP Electrical Connector - 2.3L

   Courtesy of MAZDA MOTORS CORP.
3. Connect the CKP electrical connector.
   Fig 4: Removing M6 Bolt - 2.3L

   Courtesy of MAZDA MOTORS CORP.
4. Remove the M6 bolt.
   Fig 5: Removing Special Tool - 2.3L

   Courtesy of MAZDA MOTORS CORP.
5. Remove the special tool.
   Fig 6: Installing Plug For Crankshaft Timing Peg - 2.3L

   Courtesy of MAZDA MOTORS CORP.
6. Install the plug for the crankshaft timing peg.
   Fig 7: Installing Bolt - 2.3L

   Courtesy of MAZDA MOTORS CORP.