LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B2300 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine] >> Drive Cycles >> Vehicle Preparation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Preparation

  1. Attach WDS or equivalent Tester and access the ECT, FLI, and IAT PIDs.

    Verify the IAT PID is between 4-38°C (40-100°F).

    Verify the FLI PID is between 50% and 75%.

  2. Warm the vehicle until the ECT PID reaches a minimum of 77°C (170°F).
  3. Without returning to key OFF, clear all DTCs using WDS or equivalent Tester generic OBD II function. DTC P1000 will remain.
  4. Access the On-Board System Readiness Menu on the WDS or equivalent Tester to view the status of the OBD II monitors.
  5. Proceed with the selected monitor repair verification drive cycle. Once started, the engine must not be turned off.
scientia non olet · About LEMON Manuals