Fuel Injector Removal/Installation: Notes
- Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE .)
- Disconnect the negative battery cable.
- Remove the dynamic chamber. (See
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
.)
- Disconnect the fuel injector connectors and remove the harness from the fuel distributor.
- Remove in the order indicated in the table.
Courtesy of MAZDA MOTORS CORP.
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- Disconnecting/connecting the quick release connector without cleaning it may possibly cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free of foreign material.
- Install in the reverse order of removal.
- Complete the "AFTER REPAIR PROCEDURE". (See AFTER REPAIR PROCEDURE .)