LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Crankshaft Position (CKP) Sensor Inspection >> Resistance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection

  1. Disconnect the CKP sensor connector.
  2. Measure the resistance between CKP sensor terminals A and B using an ohmmeter.
    • If not as specified, replace the CKP sensor.
    • If CKP sensor resistance is okay, but PID value or PCM terminals 21 and 22 voltages are out of specification, perform the "Circuit Open/Short Inspection".

      Specification 

      267-325 ohms 

scientia non olet · About LEMON Manuals