LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Pinout Values and Diagnostic Parameters >> Control Module Pinout Values - Dynamic Stability Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Module Pinout Values - Dynamic Stability Control

DSC HU/CM INSPECTION
1. Disconnect the DSC HU/CM connector.
2. Connect the negative battery cable.
3. Attach the tester lead to the DSC HU/CM harness side connector, then inspect voltage, continuity or resistance according to the standard (reference value) on the table.

Part 1:




Part 2:




Part 3:





Standard (Reference Value)

scientia non olet · About LEMON Manuals