Generator On-Vehicle Tests
CAUTION:
- To prevent damage to the generator, do not make the jumper wire connections except as directed.
CAUTION:
- Do not allow any metal object to come in contact with the housing and the internal diode cooling fins with key on or off. A short circuit will result and burn out the diodes.
NOTE:
- Battery posts and cable clamps must be clean and tight for accurate meter indications.
NOTE:
- Refer to the battery tester manual for complete directions for testing the charging system.
- Turn off all lamps and electrical components.
- Place the transaxle range selector lever in NEUTRAL and apply the parking brake.
- Carry out the GENERATOR ON-VEHICLE TESTS - LOAD TEST and GENERATOR ON-VEHICLE TESTS - NO LOAD TEST according to the following component tests: