Removal & Installation

Remove the air cleaner outlet tube. Refer to AIR CLEANER OUTLET PIPE -- 2.0L ZETEC or AIR CLEANER OUTLET PIPE -3.0L DURATEC (4V) .
Disconnect the mass air flow (MAF/IAT) sensor electrical connector.

Fig 1: Identifying Mass Air Flow (MAF/IAT) Sensor Electrical Connector
Courtesy of MAZDA MOTORS CORP.
Remove the four nuts and the MAF/IAT sensor.

Fig 2: Identifying Mass Air Flow (MAF/IAT) Sensor Nuts
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.