Using WDS or equivalent

Connect the WDS or equivalent to the DLC-2.

Fig 1: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
Start the fuel pump using the "FP" simulation function.
Verify that there is no fuel leakage from the pressurized parts.
- If there is leakage, replace the fuel hoses and clips.
- If there is damage on the seal on the fuel pipe side, replace the fuel pipe.
Standard
1. There shall be no leakage after 5 min.
After reinstallation, repeat step 1- 2 in the fuel leakage inspection.