LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Barometric Pressure (BARO) Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Barometric Pressure (BARO) Sensor Removal/Installation

  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Remove the plug hole cover.
  4. Remove the battery duct.
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 1: Barometric Pressure (BARO) Sensor Removal/Installtion & Torque Specifications
    G03636167Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals