Spark Plug Removal/Installation
CAUTION:
- If a spark plug that is not as specified is installed, sealing performance will be deteriorated. Install only the specified spark plug when replacing.
- Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
- Disconnect the negative battery cable.
- Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .
- Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION )
- Remove the spark plugs using a plug-wrench.
- Install in the reverse order of removal.
Tightening torque
- 10-14 Nm {1.1-1.4kgf.m, 8-10 ft.lbf}