LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 i, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Inspection >> Resistance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection

  1. Disconnect the CMP sensor connector.
  2. Measure the resistance between CMP sensor connector terminals A and B.
    • If not within the specification, replace the CMP sensor.
    • If the monitor item status/specification (reference) is not within the specification, even though the resistance is within the specification, perform the "CIRCUIT OPEN/SHORT INSPECTION ", and repair or replace the malfunctioning part.

    Resistance 

    1. 400-550 ohms 
scientia non olet · About LEMON Manuals