Diagnostic procedure
DTC P0461 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
|
Yes | Go to the next step. |
| No | Record the FREEZE FRAME DATA on the repair order, then go to the next step. | ||
| 2 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to the available repair information.
|
| No | Go to the next step. | ||
| 3 | INSPECT INSTRUMENT CLUSTER
|
Yes | Repair or replace the malfunctioning part, then go to Step 5. |
| No | Go to the next step. | ||
| 4 | INSPECT FUEL GAUGE SENDER UNIT
|
Yes | Replace the fuel tank, then go to the next step. (See FUEL TANK REMOVAL/INSTALLATION .) |
| No | Replace the PCM, then go to the next step. (See PCM REMOVAL/INSTALLATION .) |
||
| 5 | VERIFY AFTER REPAIR PROCEDURE
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE ) |
| No | DTC troubleshooting completed. | ||