Diagnostic procedure
DTC P0505 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |||||
|---|---|---|---|---|---|---|---|
| 1 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to available repair information.
|
||||
| No | Go to the next step. | ||||||
| 2 | VERIFY RELATED PENDING OR STORED DTC | Yes | Perform the applicable DTC troubleshooting. (See DTC TABLE ) |
||||
| No | Go to the next step. | ||||||
| 3 | INSPECT A/C MAGNETIC CLUTCH OPERATION
NOTE:
|
Yes | Go to "A/C ALWAYS ON / A/C COMPRESSOR RUNS CONTINUOUSLY." of ENGINE SYMPTOM TROUBLESHOOTING then go to Step 8. (See ENGINE SYMPTOM TROUBLESHOOTING .) |
||||
| No | Go to the next step. | ||||||
| 4 | INSPECT GENERATOR CONTROL CIRCUIT MALFUNCTION
|
Yes | Go to the next step. | ||||
| No | Repair short to power supply in generator control circuit, then go to Step 8. | ||||||
| 5 | INSPECT AIR CLEANER ELEMENT
|
Yes | Clean or replace the air cleaner element, then go to Step 8. | ||||
| No | Go to the next step. | ||||||
| 6 | INSPECT THROTTLE BODY PASSAGE
|
Yes | Clean or replace the throttle body passage, then go to Step 8. | ||||
| No | Go to the next step. | ||||||
| 7 | INSPECT ENGINE COMPRESSION
|
Yes | Go to the next step. | ||||
| No | Overhaul the engine, then go to the next step. | ||||||
| 8 | VERIFY TROUBLESHOOTING OF DTC P0505 COMPLETED
|
Yes | Replace the PCM, then go to the next step. (See PCM REMOVAL/INSTALLATION .) |
||||
| No | Go to the next step. | ||||||
| 9 | VERIFY AFTER REPAIR PROCEDURE
|
Yes | Go to the applicable DTC troubleshooting. (See DTC TABLE ) |
||||
| No | Troubleshooting completed. | ||||||
|
|||||||