Transaxle Oil Inspection

TRANSAXLE OIL INSPECTION [G35M-R]
1. Park the vehicle on level ground.





2. Remove the oil level plug and washer.
3. Verify that the oil is near the brim of the plug port.
^ If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.
Specified oil grade API Service GL-4 or GL-5
Specified oil viscosity
All-season: SAE 75W-90
Above 10°C 150°F): SAE 80W-90
4. Install a new washer and the oil level plug.
Tightening torque 39 - 59 Nm (4.0 - 6.0 kgf-m, 29 - 43 ft. lbs.)