Throttle Position (TP) Sensor Removal/Installation - 2.3L

Disconnect the negative battery cable.
Remove the accelerator control splash shield.

Fig 1: Removing Accelerator Control Splash Shield Nuts - With Torque Specification
Courtesy of MAZDA MOTORS CORP.
Disconnect the throttle position (TP) sensor electrical connector.

Fig 2: Disconnecting Throttle Position (TP) Sensor Electrical Connector
Courtesy of MAZDA MOTORS CORP.
Disconnect the throttle position (TP) sensor electrical connector.
Remove the bolts and the TP sensor.

Fig 3: Removing TP Sensor Bolts
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.