LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Doors And Liftgate >> Easy Closure Control Module Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Easy Closure Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the sliding door trim.
  3. Remove the screws, and remove the easy closure control module.
  4. Disconnect the easy closure control module connector.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Easy Closure Control Module
    G03701082Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals