LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Inspection >> Resistance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection

  1. Disconnect the CMP sensor connector.
  2. Measure the resistance between CMP sensor terminals A and B using an ohmmeter.

    Specification 

    1. 308-376 ohms 
    • If not as specified, replace the CMP sensor.
    • If CMP sensor resistance is okay, but PID value or PCM terminals 2 and 28 voltages are out of specification, perform the CIRCUIT OPEN/SHORT INSPECTION .
scientia non olet · About LEMON Manuals