All Supported On Board System Readiness Tests Not Completed

BOARD SYSTEM READINESS TESTS NOT COMPLETED DESCRIPTION

20	ALL SUPPORTED ON BOARD SYSTEM READINESS TESTS NOT COMPLETED
DESCRIPTION	DTC P1000 received during emission tests

BOARD SYSTEM READINESS TESTS NOT COMPLETED INSPECTION/ACTION CHART

STEP	INSPECTION		ACTION
1	PRELIMINARY CHECKS Perform the following preliminary checks: Vacuum hoses (check for proper routing, disconnection or damage). Electrical connections. Are all checks OK?	Yes	Go to next step.
1		No	Service as required. Verify symptom no longer exists.
2	PERFORM PCM QUICK TEST See PCM QUICK TEST . Are any DTCs displayed during Continuous Memory, Key ON, Engine OFF (KOEO), or Key ON, Engine Running (KOER) Self-Tests?	Yes	Check for cause. See DIAGNOSTIC TROUBLE CODE NUMBERS .
2		No	DTC P1000 is ignored in KOEO and KOER Self-Test. If P1000 was the only DTC received, OBD II DRIVE CYCLE MALFUNCTION . Otherwise, go to next step.
3	Verify test results. If OK, DIAGNOSTIC INDEX to service any additional symptoms.