LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute s, FWD >> Repair and Diagnosis >> Engine Performance >> Symptom Troubleshooting [Engine Control System] >> Drive Cycle >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Comprehensive Component Monitor Repair Verification Drive Cycle

  1. Complete Vehicle Preparation.
  2. For M/T, accelerate from 0 to 80 km/h (0 to 50 mph). Continue to step 3. For A/T, from a stop and in overdrive, moderately accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop vehicle and repeat without overdrive to 64 km/h (40 mph) cruising for at least 30 seconds. While at 64 km/h (40 mph), activate overdrive and accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop for at least 20 seconds and repeat step 2 five times.
  3. From a stop, accelerate to 104 km/h (65 mph). Decelerate at closed throttle until 64 km/h (40 mph) (no brakes). Repeat this 3 times.
  4. Verify no DTCs are available with exception of P1000.
scientia non olet · About LEMON Manuals