Pcm Quick Test
PCM QUICK TEST
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | RECORD CONTINUOUS MEMORY DTC AND FREEZE FRAME DATA (FFD)
|
Yes | Record all stored DTCs (Continuous Memory DTC) and Freeze Frame Data (FFD) on repair order. Go to next step. |
| No | Go to next step. | ||
| 2 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to available repair information. If vehicle is not repaired, go to next step. |
| No | Go to next step. | ||
| 3 | PERFORM KEY ON, ENGINE OFF (KOEO) SELF-TEST
|
Yes | Repair KOEO DTC. Go to applicable DTC troubleshooting procedure. DIAGNOSTIC TROUBLE CODE NUMBERS . |
| No | Go to next step. | ||
| 4 | PERFORM KEY ON, ENGINE RUNNING (KOER) SELF-TEST
|
Yes | Repair KOER DTC. Go to applicable DTC troubleshooting procedure. DIAGNOSTIC TROUBLE CODE NUMBERS |
| No | If Continuous Memory DTC was present at step 1, see
DIAGNOSTIC TROUBLE CODE NUMBERS
. If Continuous Memory DTC was not present at step 1, go to SYMPTOM TROUBLESHOOTING . FUEL PUMP ALWAYS ON . |
||