LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 5 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedures

PCM REMOVAL/INSTALLATION [L3]

1. When replacing the PCM, perform the following:
- PCM configuration.

. 2. Remove the battery cover, battery duct, battery and battery tray with PCM.
3. Disconnect the PCM connector.




4. Remove the PCM from the battery tray
5. When replacing the PCM on the vehicles, perform the following:
- PCM parameter reset ( IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING.)

6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals