Transaxle Oil Inspection [A26MX-R]

TRANSAXLE OIL INSPECTION [A26MX-R]

A26MX-R:

1. Park the vehicle on level ground.
2. Remove the oil level plug and washer.
3. Verify that the oil is near the brim of the plug port.
^ If the oil level is low, add the specified amount and type of oil through the filler plug hole.

Manual transaxle oil [A26MX-R]
Specified oil grade: API Service GL-4 or GL5
Specified oil viscosity: SAE 75W-90

4. Tighten the oil level plug with a new washer.
Tightening torque 27.5 - 50.9 Nm (2.8 - 5.1 kgf-m, 37.5 - 20.2 ft. lbs.)