Engine Control Systems
- Powertrain Control Module (Pcm) Removal / Installation
- Powertrain Control Module (Pcm) Inspection
- Notes
- Using SST (104 Pin Breakout Box)
- Using the SST (WDS or equivalent tester)
- PID/Data Monitor Item Table
- 2.3L (M/T) Terminal Voltage (Reference)
- 2.3L (A/T) Terminal Voltage (Reference)
- 3.0L (M/T) Terminal Voltage (Reference)
- 3.0L (A/T) Terminal Voltage (Reference)
- 4.0L (M/T) Terminal Voltage (Reference)
- 4.0L (A/T) Terminal Voltage (Reference)
- Freeze Frame Charts
- Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Removal / Installation
- Camshaft Position (CMP) Sensor Removal / Installation - 2.3L
- CAMSHAFT POSITION (CMP) SENSOR REMOVAL / INSTALLATION - 3.0l
- Camshaft Synchronizer Removal / Installation - 3.0L
- Camshaft Position (CMP) Sensor Removal / Installation - 4.0L
- Crankshaft Position (CKP) Sensor Removal / Installation - 2.3L
- Crankshaft Position (CKP) Sensor Removal / Installation - 3.0L
- Crankshaft Position (CKP) Sensor Removal / Installation - 4.0L
- Throttle Position (TP) Sensor Removal / Installation - 2.3L
- Throttle Position (TP) Sensor Removal / Installation - 3.0L
- Throttle Position (TP) Sensor Removal / Installation - 4.0L
- Engine Coolant Temperature Sensor Removal / Installation
- Idle Air Control (IAC) Valve Removal / Installation - 2.3L
- Idle Air Control (IAC) Valve Removal / Installation - 3.0L
- Idle Air Control (IAC) Valve Removal / Installation - 4.0L
- Heated Oxygen Sensor (Ho2S) Removal / Installation
- Manifold Absolute Pressure (Map) Sensor Removal / Installation - 2.3L
- Knock Sensor (KS) Removal / Installation - 2.3L
- Knock Sensor (KS) Removal / Installation - 3.0L
- Knock Sensor (KS) Removal / Installation - 4.0L
- Clutch Pedal Position (CPP) Switch Removal / Installation
- Cylinder Head Temperature (CHT) Sensor Removal / Installation - 2.3L
- Fuel Charging Wiring Harness Removal / Installation - 2.3L
- Fuel Charging Wiring Harness Removal / Installation - 3.0L
- Fuel Charging Wiring Harness Removal / Installation - 4.0L