LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System AJ) >> Engine Control System Operation Inspection >> Fuel Injector Operation Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Operation Inspection

FUEL INJECTOR OPERATION INSPECTION CHART

STEP INSPECTION ACTION
1
  • While cranking engine, inspect for fuel injector operation sound at each cylinder using a soundscope.
  • Is operation sound heard?
 Yes Fuel injector operation is okay.
No All cylinders not heard: 
  • Go to next step.

Some cylinders not heard: 

  • Go to step 3.
2
  • Carry out main relay operation inspection.
  • Is main relay operation normal?
 Yes Inspect following:
  • Fuel injector power system related wiring harness and connectors.
  • PCM connectors.
  • Fuel injector GND and related wiring harness and connectors.
No Repair or replace malfunctioning part.
3
  • Switch fuel injector connectors of inoperative fuel injector and operating fuel injector.
  • Is operation sound heard?
 Yes Go to next step.
No Replace fuel injector.
4
  • Are wiring harness and connectors of inoperative fuel injector okay? (Open or short circuit.)
 Yes Inspect PCM terminal voltage of fuel injector signal.
No Repair or replace malfunctioning part.
scientia non olet · About LEMON Manuals