DTC P0011: Notes
DETECTION CONDITION AND POSSIBLE CAUSE (DTC P0011)
| DTC P0011 |
CMP timing over-advanced |
| DETECTION CONDITION |
- The actual valve timing is over-advanced by 15°
from the target valve timing for specified period when the oil control valve (OCV) is controlled in the maximum valve timing retard condition.
Monitoring condition
- Engine coolant temperature is above 63°C {145.4°F}
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is available it the PCM detects the above malfunction condition.
- FREEZE FRAME DATA is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- OCV malfunction
- Spool valve in OCV is stuck in advanced position
- Variable valve timing actuator is stuck in advanced position
- Loose timing chain or improper valve timing due to timing chain slippage
- PCM malfunction
|