LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System L3 With TC) >> Engine Control System Operation Inspection >> Electronic Throttle Control System Inspection >> Load compensation inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Load compensation inspection

  1. Start the engine and run it is idling.
  2. Connect the M-MDS to the DLC-2.
  3. Verify that DTC P0506 or P0507 is not displayed.
    • If DTC P0506, or P0507 is displayed, perform the DTC inspection.

      (See DTC TABLE ).

  4. Select the RPM PID.
    NOTE:
    • Excludes temporary idle speed drop just after the loads are turned on.
  5. Verify that the engine speed is within the specification under each load condition.

    Engine speed 

    ENGINE SPEED REFERENCE CHART

    Load condition Engine speed (RPM)(1)
    No load 650-750
    E/L operating 650-750
    P/S operating 650-750
    A/C operating(2) Refrigerant pressure low(3) 700-800
    Refrigerant pressure high(4) 725-825
    (1) Neutral
    (2) A/C switch and fan switch are on.
    (3) Refrigerant pressure switch (middle pressure) is off.
    (4) Refrigerant pressure switch (middle pressure) is on.
scientia non olet · About LEMON Manuals