LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B2300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Trunk Key Cylinder Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Key Cylinder Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod.
    Fig 1: Removing/Installing Trunk Key Cylinder
    G01344437Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts, then remove the trunk key cylinder.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals