Resistance Inspection: Notes
- Disconnect the CHT sensor connector.
- Measure the resistance between the CHT sensor terminals.
- If it is not within the specification, replace the CHT sensor.
- If the monitor item status/specification (reference) is not within the specification, even though the resistance is within the specification, perform the "Circuit Open/Short Inspection".
Measure the cylinder head temperature sensor resistance (approx.).
CYLINDER HEAD TEMPERATURE SENSOR RESISTANCE REFERENCE
| Cylinder head temperature (°C {°F}) | Resistance (kilohm) |
|---|---|
| 20 {68} | 37.387 |
| 80 {176} | 3.775 |