High-Mount Brake Light Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)

Remove in the order indicated in the table/figure.

REMOVING/INSTALLING HIGH-MOUNT BRAKE LIGHT ⁽¹⁾

Component/Step No.

Component Description

High-Mount Brake Light (See HIGH-MOUNT BRAKE LIGHT REMOVAL NOTE ). (See HIGH-MOUNT BRAKE LIGHT INSTALLATION NOTE )

Connector

Socket

High-Mount Brake Light Bulb

⁽¹⁾	See Fig 1.

Fig 1: Removing/Installing High-Mount Brake Light

Courtesy of MAZDA MOTORS CORP.

Install in the reverse order of removal.