Instrument Cluster Customized Function Setting Procedure

INSTRUMENT CLUSTER CUSTOMIZED FUNCTION SETTING PROCEDURE

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Module Programming".

- When using the PDS (Pocket PC)

1 Select "Programming".
2 Select "Module Programming".

3. Then, select the following from the screen menu.

- "Programmable Parameters"
- "Warning Lamps/Chimes"

4. Select the following items and change the setting according to the directions on the screen.

Supported items
- Fuel Response Data (level 1-16)