Crankshaft Position Sensor: Testing and Inspection

CRANKSHAFT POSITION (CKP) SENSOR INSPECTION [MZI-3.7]

Visual Inspection

1. Remove the CKP sensor. Service and Repair

2. Verify that there are no metal shavings on the CKP sensor.

- If there is a malfunction, replace the CKP sensor. Service and Repair

Resistance Inspection

1. Remove the CKP sensor connector.

2. Measure the resistance between the CKP sensor terminals.






- If not within the specification, replace the CKP sensor. Service and Repair

CKP sensor resistance
- 575-790 ohms [18-28 °C {64.4-82.4 °F}]