LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 s Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC Off Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC Off Switch Removal/Installation

  1. Remove the following parts.
    1. Front scuff plate (driver-side). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
    2. Front side trim (driver-side). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
    3. Upper panel. See UPPER PANEL REMOVAL/INSTALLATION .
    4. Decoration panel (driver-side). See DECORATION PANEL REMOVAL/INSTALLATION .
    5. Hood release lever. See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .
    6. Meter hood. See METER HOOD REMOVAL/INSTALLATION .
    7. Lower panel (driver-side). See LOWER PANEL REMOVAL/INSTALLATION .
  2. Press the tabs.
  3. Remove the DSC OFF switch
  4. Install in the reverse order of removal.
    Fig 1: Identifying DSC OFF Switch Removal/Installation
    G06205595Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals