Crankshaft Position (CKP) Sensor Removal / Installation - 2.3L: Installation

NOTE:

• A new CKP sensor must be installed when ever the old sensor is removed.

Fig 1: Locating CKP Sensor

Courtesy of MAZDA MOTORS CORP.

1. Install a new CKP, but do not tighten the bolts at this time.
   Fig 2: Locating Alignment Tool With Mounting Bolts With Torque Specification

   Courtesy of MAZDA MOTORS CORP.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
   Fig 3: Locating Crankshaft Position Sensor Electrical Connector

   Courtesy of MAZDA MOTORS CORP.
3. Connect the CKP electrical connector.
   Fig 4: Locating M6 Bolt

   Courtesy of MAZDA MOTORS CORP.
4. Remove the M6 bolt.
   Fig 5: Identifying Crankshaft Timing Peg SST

   Courtesy of MAZDA MOTORS CORP.
5. Remove the crankshaft timing peg SST.
   Fig 6: Plug With Torque Specifications

   Courtesy of MAZDA MOTORS CORP.
6. Install the plug for the crankshaft timing peg.
   Fig 7: Locating Plug

   Courtesy of MAZDA MOTORS CORP.