Wiper Control Module: Testing and Inspection

AUTO LIGHT/WIPER CONTROL MODULE INSPECTION

1. Remove the following parts:
a. Passenger-side front scuff plate Front Scuff Plate Removal/Installation

b. Passenger-side front side trim Front Side Trim Removal/Installation

c. Dashboard under cover Dashboard Under Cover Removal/Installation

d. Grove compartment Service and Repair

e. Passenger-side lower panel Lower Panel Removal/Installation

2. Remove the auto light/wiper control module with the connector connected. Auto Light/Wiper Control Module Removal/Installation

3. Measure the voltage at the auto light/wiper control module terminals as indicated below.

Terminal Voltage List (Reference)













*1
Without auto light/wiper system