Diagnostic Monitoring Test Results Access Procedure

ON-BOARD DIAGNOSTIC TEST [LF, L5]

Diagnostic Monitoring Test Results Access Procedure

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Powertrain".
- Select "OBD Test Modes".
- Select "Mode 6 On-Board Test Results".

- When using the PDS (Pocket PC)

- Select "OBDII Modes".
- Select "Mode 6 On-Board Test Results".

3. Verify the diagnostic monitoring test result according to the directions on the screen.