Body Control Module (BCM) Inspection: Notes

Remove the front scuff plate. (driver-side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
Remove the front side trim. (driver-side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
Remove the BCM with the connector connected. (See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION .)
Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.

If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".

If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.