Control System Personalization Features Setting Procedure
NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
- Select the "Module Programming".
- Select menu in the "BCM/GEM".
- Select an item name, and then select option.
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING REFERENCE CHART
| M-MDS display | Function | Initial setting | Setting content | Control unit |
|---|---|---|---|---|
| Smart turn | The 'turn light system' function can be set. | Disabled | Disabled/Enabled | BCM |
| 2 stage door unlocking (with AKE) | 2-step unlocking system can be set. | Enabled | Disabled/Enabled | BCM |
| Auto room lamp (when doors unlocked) | The automatic illumination function of the interior light when the doors are locked can be canceled. | Enabled | Disabled/Enabled | BCM |
| Auto relock timer (without AKE) | Auto re-lock operation timing can be changed. | 30sec | Disabled, 30sec, 60sec, 90sec | BCM |
| Auto room lamp (when IG-Off) | The automatic illumination function of the interior light after the ignition is switched off can be canceled. | Enabled | Disabled/Enabled | BCM |
| Answer Back Buzzer | Answer back buzzer can be set to inoperable. | Enabled | Disabled/Enabled | BCM |
| Window closing/opening with advanced-key/transmitter | Exterior open/close function can be set to inoperable. | Enabled | Disabled/Enabled | BCM |
| Room lamp timer | The elapsed time between the doors closing and the interior light turning off can be adjusted. | 15sec | 15sec, 7.5sec, 30sec, 60sec | BCM |
| Room Lamp Battery Saver Timer | The elapsed time for the interior light to automatically turn off when a door is ajar can be adjusted. | 30min | 30min/10min | BCM |
| Window closing with key | Exterior close function can be set to inoperable. | Enabled | Disabled/Enabled | BCM |
| Window opening with key | Exterior open function can be set to inoperable. | Enable | Disabled/Enabled | BCM |