Mass Air Flow (MAF)/Intake Air Temperature (Sat) Sensor Removal/Installation

NOTE:

• The MAF sensor and IAT sensor cannot be removed as a single unit When replacing the MAF sensor or IAT sensor, replace it together with MAF/IAT sensor as a single unit.

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI 3.7 V6] .)
2. Disconnect MAF/IAT sensor connector.
3. Remove the MAF/IAT sensor.
4. Install In the reverse order of removal.

Fig 1: MAF And IAT Sensor With Mounting Nuts

Courtesy of MAZDA MOTORS CORP.