Instrument Cluster DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Malfunction location | Reference |
|---|---|---|
| B10D5:13 |
|
(See SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D7:05 | Key ID number program error | (See SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D7:51 | Instrument cluster has detected unprogrammed key ID number | (See SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D7:81 | Instrument cluster cannot read key ID number data normally | (See SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D7:94 | Key ID number data cannot be read | (See SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D8:00 | Only one key or no key has been programmed | (See SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10D9:87 | No detected communication with coil antenna | (See SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10DA:51 | Communication error between instrument cluster and PCM (data transfer failure) | (See SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B10DA:62 | ID number data in instrument cluster and PCM do not match | (See SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| C0077:00 | Low tire pressure | (See DTC C0077:00 .) |
| C2011:49 | Wheel unit No. 1 internal malfunction | (See DTC C2011:49/C2012:49/C2013:49/C2014:49 .) |
| C2012:49 | Wheel unit No. 2 internal malfunction | |
| C2013:49 | Wheel unit No. 3 internal malfunction | |
| C2014:49 | Wheel unit No. 4 internal malfunction | |
| C2011:87 | Wheel unit No. 1 (No response) | (See DTC C2011:87/C2012:87/C2013:87/C2014:87 .) |
| C2012:87 | Wheel unit No. 2 (No response) | |
| C2013:87 | Wheel unit No. 3 (No response) | |
| C2014:87 | Wheel unit No. 4 (No response) | |
| P0070:14 | Ambient temperature sensor circuit malfunction | (See DTC P0070:14 [INSTRUMENT CLUSTER] .) |
| U0001:88 | Module communication error (HS-CAN) | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) |
| U0010:88 | Module communication error (MS-CAN) | |
| U0100:00 | Communication error to PCM | |
| U0100:87 | Communication error between the instrument cluster and the PCM (no response) | (See SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| U0101:00 | Communication error to TCM | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) |
| U0121:00 | Communication error to DSC HU/CM | |
| U0127:00 | Communication failure between instrument cluster and keyless receiver | (See DTC U0127:00 .) |
| U0140:00 | Communication error to BCM | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) |
| U0151:00 | Communication error to SAS control module | |
| U0164:00 | Communication error to climate control unit | |
| U0214:00 | Communication error to keyless control module | |
| U0233:00 | Communication error to BSM control module (RH) | |
| U0300:00 | Instrument cluster configuration error | (See DTC U0300:00 [INSTRUMENT CLUSTER] .) |
| U0401:68 | Signal error from PCM | (See DTC U0401:68 [INSTRUMENT CLUSTER] .) |
| U0401:92 | Illumination command signal from PCM continues for 20 s or more | (See DTC U0401:92 [INSTRUMENT CLUSTER] .) |
| U0402:68 | Signal error from TCM | (See DTC U0402:68 [INSTRUMENT CLUSTER] .) |
| U0402:92 | On request from TCM | (See DTC U0402:92 [INSTRUMENT CLUSTER] .) |
| U0415:68 | Signal error from DSC HU/CM | (See DTC U0415:68 [INSTRUMENT CLUSTER] .) |
| U0415:92 | On request from DSC HU/CM | (See DTC U0415:92 [INSTRUMENT CLUSTER] .) |
| U0452:92 | On request from SAS control module | (See DTC U0452:92 [INSTRUMENT CLUSTER] .) |
| U0515:68 | Signal error from keyless control module | (See DTC U0515:68 [INSTRUMENT CLUSTER] .) |
| U0515:92 | On request from keyless control module | (See DTC U0515:92 [INSTRUMENT CLUSTER] .) |
| U2005:86 | Signal error from PCM | (See DTC U2005:86 [INSTRUMENT CLUSTER] .) |
| 1)2100:00 | Instrument cluster configuration error | (See DTC U2100:00 [INSTRUMENT CLUSTER] .) |
| U3000:41 | Instrument cluster internal malfunction | (See DTC U3000:41 [INSTRUMENT CLUSTER] .) |
| U3000:42 | ID registration failure | (See DTC U3000:42 .) |
| U3003:16 | Instrument duster power supply voltage is low | (See DTC U3003:16 [INSTRUMENT CLUSTER] .) |