OBD-II On-Board System Readiness Test

OBD-II ON-BOARD SYSTEM READINESS TEST [13B-MSP]

- This shows the OBD-II systems operating status. If any monitor function is incomplete, M-MDS will identify which monitor function has not been completed. The Fuel system, Misfire and CCM are continuous monitoring-type functions. The A/F sensor, HO2S, Thermostat, AIR system, Catalyst and EVAP system will be monitored under drive cycles. The OBD-II diagnostic system is initialized by performing the DTC cancellation procedure or disconnecting the negative battery cable.