PCM Removal/Installation

PCM REMOVAL/INSTALLATION [MZR 1.5]

CAUTION:
- The PCM is built into the air cleaner cover. Applying excessive pressure to the cover could damage the PCM. Be careful not to put your hands on the PCM during the removal/installation.

- Removing the PCM from the air cleaner cover could damage the sealing or the circuitry. Do not remove the PCM from the air cleaner cover.

1. Remove the air cleaner cover. Service and Repair

2. Install in the reverse order of removal.

3. When replacing the PCM on the vehicles, perform the following:

- PCM configuration Programming and Relearning
- PCM parameter reset Programming and Relearning