Fuel Tank Pressure Sensor: Testing and Inspection

FUEL TANK PRESSURE SENSOR INSPECTION [MZR 1.5]

CAUTION:
- The fuel tank pressure sensor cannot be removed as a single unit. When replacing the fuel tank pressure sensor, replace it together with the evaporative hose component as a single unit.

1. Connect the M-MDS to the DLC-2.

2. Switch the ignition to ON.

3. Verify that the Fuel tank pressure sensor output voltage (M-MDS PID: FTP) is within the specification. PCM Inspection

- If not as specified, replace the evaporative hose component.