LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Touring Plus >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 2.5] >> Crankshaft Position (CKP) Sensor Inspection >> Visual Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual Inspection

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Perform the following procedure for easier access.
    1. Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION .)
    2. Remove the splash shield. (See SPLASH SHIELD REMOVAL/INSTALLATION .)
  3. Disconnect the CKP sensor connector.
  4. Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION .)
  5. Verify that there are no metal shavings on the sensor.
    • If there is a malfunction, remove any metal shavings that are adhering.
scientia non olet · About LEMON Manuals